ZyXEL ExpWave 240B Wireless Bridge Outdoor Longer aus

ZyXEL ExpWave 240B Wireless Bridge Outdoor Longer

Brand new in box

The ZyXEL ExpWave 240B (EW240B) is a Wireless Bridge/Router for Inter-building Point to Point Ethernet connection. With integrated IP routing and enhanced wireless security feature, EW240B is unmatched Point to Point solution in the world today. By supporting IPSec VPN (Virtual Private Network) with 3DES engine, EW240B is
particularly suited for financial banks, businesses and government agencies to deploy wireless networks for most sensitive data transmission. System privacy is inherent through the MAC & 802.1x based mutual authentication functionality by preventing unauthorized intrusion to the radio link. EW240B is outdoor-mounted design to minimize the RF cable loss connecting to antenna for outdoor application and thus has outstanding performance in the longer
communication distance. Supplying the power and Ethernet connectivity concurrently via a single Ethernet cable, the power over Ethernet (POE) technology makes quick outdoor installation. The optional antenna alignment kit, showing relative signal strength index (RSSI) and signal to noise ratio (SNR), is uniquely designed to aid easy antenna alignment while operating in the point to point conncection. EW240B achieves rapid return on investment (ROI) for
inter-building connection compared to T1 leased line with high capacity and high data throughput. The wireless router feature can also be configured as point to two points architecture for multi-site connections as well as wireless relay function. The wireless relay function effectively assists to overcome the non-line of sight (NLOS) problem in the real environment.

ExpWave 240B product types

ExpWave 240B could be configured into two kinds of system topology. When operated in the point-to-point mode, one access point (AP) and one access client (AC) are needed. When operated in the point-to-two-points mode, one AP and two ACs are needed

Specification of ExpWave 240B

System topology
Point to point (PTP): 1 access point (AP), 1 access client (AC)
Point to two points (PT2P) :1 access point (AP), 2 access clients (AC)

Radio
Frequency range :2.4 - 2.4835 GHz ISM band
RF modulation :CCK Direct Sequence Spread Spectrum (DSSS)
Channel width :22 MHz
Number of channels :14 channels (including 3 concurrent channel, depending on locality)
North america fcc: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI :2.412~2.472 GHz (13 channels)
Japan: 2.412~2.484 GHz (14 channels)
France :2.457~2.472 GHz (4 channels)
Spain :2.457~2.462 GHz (2 channels)
Transmit power: 0 ~ 18 dBm (typical)
Receive sensitivity (PER 8%): -83 dBm @ 11 Mbps
Processing gain :10 dB Nominal
Antenna alignment :Built-in diagnostics utility, optional external tool                        kit through console cable

Communication Distance
Europe/ ETSI (EIRP 20dBm):

0.8 mile/1.2 km with 12 dBi flat panel antenna
1 mile/2 km with 16 dBi flat panel antenna
US FCC (EIRP 36dBm) :

2 miles/3 km with 12 dBi flat panel antenna

Networking Features
Operation mode:Bridge mode (PTP)
                         Router mode (PTP, PT2P, Wireless relay)
Media access control :CSMA/CA
Network protocols: IP, UDP, TCP, ICMP, ARP, IGMP
Routing protocols (Router mode) :RIP 1, RIP 2, Static route, IP Alias,  IP policy routing
Application protocols (Bridge mode) :SNMP, DHCP client
Application protocols (Router mode) :SNMP, DNS proxy/server, Telnet, Traceroute, DHCP Client/Server

SECURITY
System privacy protection :SSID, WEP(64/128 Bits), MAC access control, 802.1x based mutual authentication
Filtering (Router mode) :IP filter, Packet filter
Wireless data encryption and authentication:VPN IPSec tunnel

CONFIG. AND MANAGEMENT
Management and setup :SNMP/Web/Telnet based management interface
SNMP agents: MIB II, Bridge MIB
Local console management :System configuration & access control with password protection
Software upgrade :FTP/TFTP download

Mechanical & Operating Features
Dimension :250(H) × 198(W) × 75(D) mm (not including antenna)
Weight :2050 gm
Operating temperature :-30oC ~ +60oC
Relative humidity: 0~ 95% (non-condensing)
Physical interfaces
Antenna connection: N male RF connector
Network & power connection: 8-pin female connector with special water proof
Console connection: 8-pin male connector with special water proof
Antenna connection cable :LMR400 2m, N female/male connectors with special water proof
Console connection cable :DB-9 female/8-pin female connectors with special water proof, 2m
Grounding cable: Electric wire with shielded cover, 3m

Electrical Features
Power consumption (maximum) :6.5 W maximum @ 48 VDC

Network/Power injector
Power adaptor :100~240VAC, 50~60 Hz
Dimension :95.5 x 59.6 x 26 mm

Weight: 5.5kg
Connectors :PWR (jack), TO LAN (RJ45), TO RADIO (RJ45)
LED: PWR (Green), ACT (Orange)
Cat. 5 cable: RJ-45/ 8-pin male connectors with special water proof
Cat. 5 cable length :20m default, 50m/90m option

Regulatory Approvals
Electromagnetic emission :FCC Part 15, Class B
Safety approval :CSA C22.2 No 950, EN60950, IEC 950

Installation
Mast mount kit :Stainless steel for 40~50 mm diameter mast,outdoor

Network Topology Planning
The ExpWave is designed for business companies to build up a secure Inter-building wireless communication system between offices’ Ethernet connection. Your ExpWave can not only be applied for Point to Point (PTP) application but also the Point to Two Points (PT2P) for multi-sites connection. The ExpWave consists of access point (AP) and access client (AC). The ExpWave access point can communicate with one ExpWave access client for PTP connection or two ExpWave access clients for PT2P connections on the air.

Positive feedbacks about us: