1 Watt PLL FM Broadcast Transmitter Hi Fi Stereo SOUND

Brand New

1 Watt Stereo Transmitter

Highest quality for 1W  FM  transmitter built & tested

LCD Display  >> Easy to Read Frequency Setting in Dark

Plug and Play

Low Pass Filter Included to Keep Low Harmonic

This 1W FM transmitter was built to produce excellent Stereo broadcasting quality,
while keeping low price and easy of use: just connect to a fm antenna, CD player/computer/mixer and 13.8V and you are on the air!
Choose your frequency with up/down buttons & LCD display.

It is engineered to work with lock range > 20 Mhz (88-108 Mhz without changing the inductor value at oscillator)

with low Freq. audio response is optimized, when turned on, there will be 3 seconds delay for the lock condition of the freq.

The output is filtered by 7th order Butterworth LPF. Therefore the RF output is Cleaner

Software inside the LCD

1.     Self - Diagnostic    

At Start Condition, it will proceed a SELF-Diagnostic procedure.

The result will be display in the LCD, The Self-Diagnostic result is for:

-CODE#1 IC EEPROM : EEPROM IC is damage

-CODE#2 IC PLL : PLL IC is damage or the data cable is unconnected

2. PLL Status

The status of PLL, LOCK or UN-LOCK will be displayed at LCD.

3. ON-AIR delay

After PLL LOCK there will be ON-AIR delay = 3 seconds before ON-AIR delay Output Activated.

Active = 0 volt. Not Active =  5 volt

4. MENU

HOW TO ENTER MENU PROGRAMMING

·        Push <= button and => Hold buttons then turn on LCD.

·        Keep holding button until “ ENTERING SETMODE “ appear

·        Push <= button and => button until desired menu appear

·        Push => button and hold for more than 1 second to enter current menu

MENU 1.      Station Name ( Change station Name )

• Character to be change is marked by underline / cursor. Push <=button and => button to change the character. There is 96 different character: Space, number 0-9, alphabets A-Z, a-z, and 33 special characters.
• Push <= button and hold for more than 1 second to move cursor to the next column. If cursor already end to the last column, it will be back to the first column
• Push => button and hold for more than 1 second to store the new station name.
• Turn off LCD to cancel.

MENU 2.     PLL step ( change the PLL step )

• Push <= button and => button to change the PLL step. Available step is 50 kHz and 100 kHz.
• Push => button and hold for more than 1 second to store the new PLL step.
• The working Frequency will be reset to 98.00 MHz
• Turn off LCD to cancel.

MENU F.     Reset / Default setting

• No further option. When F menu selected the memory will be reset to default factory setting.

Very simple to use (No tune design)

This Transmitter is 1W exciter with PLL controller. It has LPF Butterworth at the output section with LCD display that can show the Frequency and Station name continuously.
It has two colors blue with white character, with lock Range >20 MHz can be control around 88 - 108 Mhz

It has the dual sampling stereo coder, Frequency generate with XTAL 4.864Mhz and it creates 19kHz and 38kHz signal with highest stability

This Circuit is design with the combination of analog and digital technique. Each audio Channel is sampling twice each periods of digital signal reference.

You will need to get the appropriate broadcasting licence to operate these transmitters.

Limited Warranty for 12 month

Visit Our Store For A Bigger Range, And To Buy This Product Via Buy It Now.

Consolidate your shipping and save 50%! We offer a 50% discount on the shipping of each item paid for at the same time. Full shipping will be charged for the item with the highest shipping cost, other items will be charged at 50%. Just wait for all your items to end before making payment.

      TERMS & CONDITIONS

·         The successful highest bidder must complete the sales transaction within 3 days after the end of the auction, otherwise we will assume the winner abandon the Auction.

·         A non-paying bidder form will be sent to ebay if the winner can not comply with the conditions: In addition Negative feed back will be left to the non-paying customer.

·         Subrata1979 reserves all rights to cancel any bids from a bidder who has Negative feedback(s).

·         All item prices include GST.

·         While all care is taken, any errors or omissions in the item details is unintentional.

      SHIPPING.

·         Pick ups are not possible.

·         Items will not ship until payment has been received in full.

DELIVERY.

·         Dispatch of goods will be arranged through us.

·         Please allow up to 5 working days for delivery within Australia and 14 days internationally, although in most cases delivery is much quicker.

·         If problems do arise, please contact us , and we will endeavour to resolve any issues.

Thank you