900w Off-Roads Electric Motor e Bike Bicycle Kit ebike

36v 900w uses External Controller

RRP$1699

900w 36v brushless Off-Roads kit fastest on the market AVAILABLE!!

FASTER THAN ANY 900w HUB MOTOR KITS ON THE PLANET

THIS KIT USES THE BIKES REAR 6-9 GEARS

so this means not 1 speed you get a 6-9 speeds electric motor bicycle

11~34T IS BEST 5-10 speeds rear cog set upto 62kph

call dean - 0404-977-013 for any questions.

Climbs all hills when using the bikes 1st, 2nd & 3rd, gears

with speeds up to 36kph up hills depending on riders weight!

62kph Max speed and 62kph with pedal assist on 26" bike 

DO THE PEDALS SPIN WITH MOTOR ALWAYS?????  NO

WHEN MOTOR IS RUNNING YOU DO NOT HAVE TO PEDAL

BUILT-IN FREE-WHEEL SYSTEM  PEDAL ONLY IF YOU WANT TO AT ANYTIME

36 volts  900 Watts BRUSHLESS Motorized Bicycle Off-Roads Kit:

Shipping weight approx. 7.5KG.

NEED BATTERIES? to view all batteries Check out my other items!

36v 10ah-20ah is recommended...upto 25-50km ranges (USED ON 900W)

and gives HUGE hill climbing ability

HOW TO INSTALL YOUR D.I.Y. BICYCLE KIT

How to install your D.I.Y. single chain-wheel ebike kit
Step-By-Step

1.) Use crank remover to remove the nut off the cranks.

2.) Use crank remover to remove the chain wheel nut

3.) Use crank remover to remove the chain wheel and cranks

4.) The distance between Rear wheel and Button bracket must be at least  60mm for 200w-1200w 1000w needs 70mm gap

5.) Remove the nut from the button bracket

6.) Remove the Axle from the button bracket and replace with the longer Axle.

7.) Put the motor’s mounting bracket on button bracket.

8.) Put the motor on mounting bracket

9.) Put the “ chain wheel on the freewheel crank” on Axle.

10.) Add some chain on the all chain ( about 5 notes)

11.) Fix the cranks by crank remover

12.) Put the chain over motor’s sprocket and adj. the motor to the right high, make sure the nut is fix on the right place

13.) Put the chain under motor’s sprocket and adj. the motor to the right high, make sure the nut is fix on the right place

14.) Put the motor throttle on the right hand side.

15.) Put the gear grip on the left hand side

16.) Plug in the throttle’s plug in to motor side controller plug

17.) Plug the batters power cord to motor’s power cord. Completed Electric Bike