NOTE: From time to time we run promotional special price... and occasional NO RESERVE $0.99C auctions for this and other products..... so CHECK OUR OTHER LISTINGS and you may grab a real bargain ! (to find other auctions click on see other items found in the "seller Info" box at the top right of this auction. Otherwise if you can't wait simply click on the BUY NOW button.
SMART BURIED WIRE ELECTRONIC
RADIO COLLAR
PET CONTAINMENT SYSTEM
Operates on 12V, 110V or 240V !
(Latest Multi Feature Model with heavy duty transmitter cable)
AUSTRALIAN SUPPLIER carrying STOCK and SPARE PARTS
Special PROMO offer only $179
with
FREE
NO-BARK training collar
(Normally $19.95)
Easy to install - Easy to use, STATE OF THE ART dog fencing system utilises a sophisticated electronic transmitter wire defined boundary in conjunction with a radio reciever training collar. Multiple collars can be used for containing any number of dogs. (1 Collar required per dog)
PET FENCE SYSTEM BENEFITS:
Inexpensive: Provides pet containment at a fraction of the cost of erecting a boundary fence.
Concealed Barrier: Totally unseen perimeter with no visible physical barrier to obstruct your view
Flexible Containment Design - Allows building a custom containmnet system based on individual environmental requirements
Mutliple Dog Training System - Additional collars allow for an unlimited number of pets
Area Containment or Entry Prevention - Specific areas can be enclosed to restrain pets. Gardens, Pools, livestock etc.
Safe: The transmitter emits a harmless radio signal along the boundary wire to initiate the dog collar
Progressive Tone Stimulus - Initial warning tone before static stimulus when pet moves closer to the boundary.
Variable Pulsed Stimulus
- The closer the distance between your pet & the boundary, the more intense the static stimulus.
Power Boost Switch - The proximity to the boundary before activation can be adjusted at the transmitter
Speed Detect Anti-Run Through - The faster a pet moves toward the boundary the sooner and higher the level of static intensity.
(The collar automatically increases the stimulation when your dog continues more than 1/3 of the way through the containment field, regardless of the transmitter stimulation level setting.
Auible Wire Break Alarm - An audible alarm to alert you if the transmitter senses a break in the wire or if the boundary system is not functioning correctly.
Visual Wire Break Alarm - The system's control center will light up if it senses a break in the wire.
Quick Disconnect Terminals - quick and secure connection or disconnection of the wire to the control center.
Energytech's INTELLIGENT concealed in ground Dog fencing System simply and easily keeps pets either IN or OUT of defined spaces and unlike physical fences, dogs can't escape through "holes" in the fence when wearing a radio field activated "containment" collar.
Designed for small, medium or large area's the antenna wire transmits signals that are detected by any number of receiver collars and should your dog (or dogs) attempt to go beyond the containment field it will hear a warning tone. If the dog continues toward the radio controled boundary, the collar will deliver a mild static warning stimulus (similar to a spatic pulse from touching a car door) until it moves back from the defined perimeter..
Once you decide on and define the boundary perimeter the transmitter wire can be buried in the ground or attached to an existing building or fence. Thus you can configure one or more area's as either being available or having restricted access for your pet as an invisible boundary.
With a simple training process a dog quickly learns know the difference between "safe" areas and "out of bounds" areas and the run-through prevention and time-out between corrections help any dog learn his limits quickly and safely.
Small boundary indicator flags should initially be positioned along the defined boundary as a visible indicator for the dog during the training period. After pet training the boundary indicator flags can be removed as the dog becomes concious of the limits the invisible fence imposes. Note that careful and thorough pet training is required for optimum results with this product.
The pet warning distance for this product is fully adjustable from about 2cm up to aproximately 2m for up to 300m wire length. Additional boundary wire may be added however the longer the wire the lower the transmitter power will be, thereby reducing the boundary warning distance to your pet. The transmitter controller is recommended for use with no more than a maximum 500m of transmitter wire.
OPTIONAL EXTRA'S:
200m/roll x 1mm heavy duty transmitter wire AU$29 ea
Additional training collar AU$39 ea 
Battery SET........ 3 x 4LR44 6V batteries for Pet Fence Collar AU$10 (per set of 3) (Recommended extra)
Anti Bark Collar
(1 included FREE with Pet Fence)
AU$19.95 if purchased seperately
EASY SETUP:
The installation is easy...Plan the containment boundary and then lay out the wire. The design is only limited by your immagination but here are a few possible scenarios

Thousands of other layouts are possible !!!!
BEFORE burying the wire install the transmitter box in a clean and dry position and connect with the wire in a complete loop. Turn on the power source to check the wire loop integrity and the system is operating correctly. ("OK" LED light means the loop system is complete and ready for use, "BREAK" LED light means the loop system is incomplete and you should check the connection and wire status again.) Once satisified system is operating correctly make a groove (with a spade or similar item) with 50-100mm depth and use gradual turns at any change of direction with a minimum of about 500mm radius. Lay the wire along the desired perimeter ensuring the wire is in a continuous loop from the transmitter and back again. Before covering the wire again activate the system to verify correct operation. Once satisified all is correct with the system then place the training flags at about 3m flag to flag spacing to act as the dog's visual clue of the boundary limits. Insert the battery into the pet collar and fit this to your dog. Train your dog by leading him around the perimeter. Let him experience the warning beeps & static stimulus so that he knows his boundaries.
Once satisified the COMPLETE system is operating you can cover the wire Note: The wire does NOT have to be buried ! You may fix the wire to structures above ground but be aware it may be prone to damage and malfunction if the wire is not protected.
Specifications:
* Pulsed Proportional stimulus
* Progressive tone stimulus
* Power boost switch
* Speed detect anti-run though
* Audible wire break alarm
* Visual wire break alarm
* Variable field width control
* Quick disconnect terminals
* LED indicator light
* Low battery consumption
* Stimulus lamp
Package Includes:
* 1 x Indoor transmitter Unit
* 1 x AC adapter power supply (110- 240v). 12V1000ma output. Fence Controller can be run straight off 12V where mains is not available
* 1 x 20-60cm Pet collar
* 1 x 100m of heavy duty boundary wire (Other systems often use flimsy thin wire which breaks easily during or subsequent to installation which time-consuming and frustrating...)
* 20 x boundary training flags
* 4 x mounting screws
* 1 Tester
* 1 Manual and Installation instructions
Warranty:
Product is supplied with a 6 Month Warranty. Product warranty is void with product misuse/abuse senario's. Warranty does not extended to any products that have been physically damaged or that have not been installed or used as per manufacturers instructions.
If your item is found damaged on arrival you must claim against the shipping service. Any product found to be defective will be repaired or exchanged at our discression and without charge. We cannot refund the shipping costs for returns.
Satisfaction Guarantee:
If you are not satisfied with your purchase in any way you may return your item for a full refund (excluding shipping charge) within 14 days of purchase. Item MUST be returned to us in NEW condition and in original undamaged packaging.
PAYMENT:
On checkout you are able to pay by Paypal, Credit card (Via PAypal) or by arranging a deposit to our bank account.
SHIPPING :
Item(s) will be sent via Standard post or Registered Mail as per your specification at time of order. (Collection can be arranged if your local). We are at Tanah Merah 4128 QLD (exit 28 on the South side of Brisbane motorway.. Phone us for specific directions 0406 680 909
CONTACT : We are very glad to help you. Please feel free to contact us, we will endevour to respond promptly to any query. Rgds Paul Davy, ENERGYTECH 0406 680 909
Advertising content protected by copyright